Subsoiler Equipment
-
Manufactured by Pastò Elia & C. S.n.c.based in ITALY
Subsoiler available from 1 tooth, an operating depth of 85 cm and perfect for machines with a power take-off between 110 and 240 ...
-
Manufactured by Dave Koenig Enterprises, Inc.based in USA
Frames: All frames are constructed with 5" x 7" x ½" structural steel rectangular tubing and are angled to provide maximum soil action with a minimum of draft load. Shanks: Specially curved shanks are mounted to the rear of the frame to maximize ripping depth and assist in alleviating trash build up. The 1 ¼" wide shanks are available with either 26" or 29" clearances between the ...
-
Manufactured by Ciancaglini S.n.c.based in ITALY
Tubular frame to which are applied by means of bolted brackets, anchors, with shear bolts and wing walls adjustable height, ideal for the working surface. ...
-
Manufactured by Dave Koenig Enterprises, Inc.based in USA
Frames: All frames are constructed with 6" x 10" x 1/2" structural steel rectangular tubing and are angled to provide maximum soil action with a minimum of draft load. Shanks: Specially curved shanks are mounted to the rear of the frame to maximize ripping depth and assist in alleviating trash build up. The 1 1/2" wide shanks are available with either 33" or 37" clearances between the bottom of ...
-
Manufactured by D W Tomlinbased in UNITED KINGDOM
Optional extras: wing kits; discs c/w fittings; depth ...
-
Manufactured by JCBL Agri Indiabased in INDIA
Length(mm) approx.:510, 550, 830, ...
-
Manufactured by ERMO S.p.A.based in ITALY
ERMO subsoilers are particularly suitable for heavy duty and at-depth working. The frame, built using high-resistance steels, is equipped with Hardox 400 tines, with a specific design which allows for a progressive penetration with low power absorption. The addition of special coulters on the tines allows for increased soil turning ...
-
Manufactured by Machino Agriculture Implements Private Limitedbased in INDIA
Sub Soiler is used to break the lower impermeable hard layer of soil, which cannot be broken by normal cultivation operations. Successful subsoiler loosens and shatters compact soil layers by creating many cracks and fissures thus allowing roots to develop more freely and water to move down more rapidly. Rather inexpensive implement ...
-
Manufactured by Badalini Srlbased in ITALY
The subsoiler CLD/ RAMBO MINI is produced to work with tractors from 45 to 110 HP. Its versatility allows to work also in greenhouses with tracked tractors and on hilly soils. Using CLD/ RAMBO MINI can be obtained exceptional energy conservation, and the ploughing coat can be broken. This machine, in fact, is manufactured with ...
-
Manufactured by Agrofer srlbased in ITALY
The Subsoiler D.A.R. Agrofer is characterized by innovative tecnologies and solutions of strength and operative versatility, qualities which make it very different from other similar machines already present on the market. With these technologies the Ridger Agrofer is ideal for Row working in vineyards, orchards, olive groves and other ...
-
Manufactured by La Sole Incbased in CANADA
This MFC combo makes it possible for compaction reduction work with the subsoiler prongs while working the soil surface with the chisel. These chisel shanks can be adjust in height to always work at the depth needed, regardless of the penetration depth of the subsoiler ...
-
Manufactured by Pastò Elia & C. S.n.c.based in ITALY
Drenater DRP-M1 Subsoiler available from 1 tooth, an operating depth of 75 cm and perfect for machines with a power take-off between 80 and 120 ...
-
Manufactured by Dave Koenig Enterprises, Inc.based in USA
Frames: All frames are constructed with 8" x 12" x 1/2" structural steel rectangular tubing and are angled to provide maximum soil action with a minimum of draft load. Shanks: Specially curved shanks are mounted to the rear of the frame to maximize ripping depth and assist in alleviating trash build up. The 2" wide shanks are available with either 37" or 41" clearances between the bottom of the ...
-
Distributed by Quivogne UK Ltdbased in UNITED KINGDOM
The S80 ensures an efficient drainage ! This subsoiler has been engineered with a straight tine of thickness 30mm, a share in high-strength steel and a draining ball Ø100mm. This design enables an efficient drainage and its robust frame gives a foolproof ...
-
Manufactured by DAL-BO A/Sbased in DENMARK
Ratoon subsoiler is based on 2 tine rows (2 to 8 tines), with a row distance of 75 cm and a tine height of 72 cm. Ratoon is equipped with either springbolts or hydraulic stone protection ...
-
Manufactured by Coorepabased in SPAIN
The rehearsals are the guarantee of effectiveness and quality in our products. The subsoilers Coorepa has been specially designed to work the land in depth.It penetrates in the floor with easiness, because the form of its arms allows that the tractor needs less power to carry out the work. They will also get with it a saving of ...
-
Manufactured by Stoess Manufacturing, Inc.based in USA
The R&R Subsoiler has been shipped around the world and used in a variety of applications. The Original Stoneville Parabolic Shank has established the reputation for being the easiest pulling shank in the industry! It has demonstrated the ability to reduce draft requirements up to 60% over other conventionally designed shanks. When ...
-
Manufactured by Dave Koenig Enterprises, Inc.based in USA
Frame:: All models are made with extra heavy duty frames constructed of 6 x 10 x ½ inch structural steel tubing. Each model is angled for maximum soil action with a minimum draft load. Hitch: The hitch is made of 6 x 6 x ½" steel tubing. Shanks: The shanks are of a special curved design mounted on the rear of the frame to give maximum depth and aide in alleviating trash build ...
-
Manufactured by Dondi S.p.A.based in ITALY
This machine is particularly suited to replace plowing, since it can handle work at depths of up to 50/60 cm, with a working width that makes the use of subsoilers one of the most cost-effective systems available today. The special 45-degree inclination of the anchor makes the DONDI subsoiler efficient for rapid soil penetration and ...
-
Manufactured by Evers Agro B.V.based in NETHERLANDS
Deeper soil conditioning. Frame clearance of 93 cm. For tractors of 80 till 225 HP. Standard category 3L three point linkage. 3 Types of tinken (St, K und Kg - thickness 30mm). Of 1 till 5 tines with different tine spacings. Available with chiselpoints of 8, 20 and 35 ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you