Vineyard Equipment Equipment For Viticulture In Europe
-
PremiumManufactured by Ligapal Sarlbased in FRANCE
Biodégradable vine Clips 100% biodégradables. LIGAPAL trellising clips are 100% biodegradable and non-polluting. Our staples help reduce waste and protect the environment. Timber used in the manufacture of trellising staples100% biodegradable LIGAPAL comes from sustainably managed forests. Certificates of authenticity at your ...
-
Manufactured by Dondi S.p.A.based in ITALY
Tool-holder for single inter-row available in two versions (Large and Medium) to mechanise espalier vineyards and orchards with minimum inter-row of 1.7 to 2.3 m based on the work tool. The PRO setup is the richest and features an advanced hydraulic system that is able to manage, through a single continuous flow from the tractor, the inter-row unit simultaneously with the movements of the ...
-
Manufactured by Casotti Irroratoribased in ITALY
DUPIGET VINEYARD is an electrical 12 V device with vertical oscillating jets suitable for treating espalier, pergola, tendone and Geneva Double Curtain vineyards. It distributes covering and systemic products with precision. It differs from DUPIGET OLIVE/ORCHARD only for the dimensions of the nozzles in the standard ...
-
Manufactured by Rinieri S.r.l.based in ITALY
Hydraulic hoeing plough linked to a fixed mount 3 point linkage complete with indipendent hydraulic distributor for the hoeing of vineyards. It is possible to mount one or two front furrows in order to increase the working width and furrows for row ...
-
Manufactured by ZASŁAW TSS Sp. z o.o. Sp.k.based in POLAND
Loading capacity: 6 000 kg. Gross Vehicle Weight: 9 200 kg. Volume: 8,5 m3 . Number of axles: 2. Box-body length: 4 040 mm. Box-body width: 2 126 mm. Height: 2 140 mm. Total length: 6 192 mm . Width: 2 250 mm. Platform height from the ground: 1 014 mm. Dropsides height: 1000 mm. Tyres size: 11.5/80 R15.3”. Wheel track: 1 500 mm. Max. speed: 25 ...
-
Manufactured by BFM SNCbased in ITALY
The stainless-steel blades of the VINEYARD TRIMMER CM-SN are designed to give a suction effect, allows the pruning of even the most young shoots, thanks to mirror polishing decreases the deposit of green. The pantograph system synchronized to 4 movements allows use both in small spaces and in very large spaces (550 mm min. to 1.550 mm max at the center of the machine), while having reduced ...
-
Manufactured by Rolmakobased in POLAND
U 645 is a harrow manufactured with purpose to work in the vineyards and gadens. Light and compact design are its most important characteristics that allow using the machine wherever there is no place to maneuver and work with larger units. The construction base was compact disc harrow (U 693) but its design has been adjusted in hitch category and size in order to cooperate most effectively with ...
-
Manufactured by Juscafresa S.Abased in SPAIN
Manure spreaders / muck spreaders agricultural trailers Juscafresa for vineyard. Destined for small and medium agriculture works / farms of vineyard. Capacity from 4,14m3 to 5,46m3. Stands out for its excellent spread quality between vineyard. Standard equipped with: Drag system 2 chains 80/12 C 10 + S 275 JR. Double horizontal beater with welded spades and with 2 lower discs. Hydraulic back ...
-
Manufactured by New Holland Agriculture - a Brand of CNH Global N.V.based in USA
Put Big Power To Work In Narrow Rows; The new T4F series builds on the legendary TNF-A narrow tractors offering upgrades in a package as narrow as 58.5 inches. Lower cab height, three transmission options, SuperSteer™ FWD axle, powerful hydraulic and engine capability plus an optional front three-point hitch lets you multitask on each ...
-
Manufactured by Clemens GmbH & Co. KGbased in GERMANY
The mulcher works exceptionally well in vegetation management and is also suitable for the shredding of sawn timber. Attachment to the carrying vehicle is performed by a stable three point attachment. Drive is provided by a power take-off shaft set to 540 revolutions/minute and a drive shaft with slip clutch that is supplied from the factory. A double-action control unit is necessary for the ...
-
Manufactured by Agri World srlbased in ITALY
The crush any kind of stones at a depth from 100 mm up to 400 mm, for valuable culture especially vineyard and orchard. The forwarding speed of the stones crushers is 300/900 m/h at 2000/2200 rpm engine then the tractors must be supplied with the creep gear or vario gear. To get the maximum output by the fs you have to bring up the ground the stones (tilling the fields with a tiller tip) or to ...
-
Manufactured by Vulcano Atomizzatori s.r.l.based in ITALY
Fiberglass tank, level capacity tank with floating light, hand-washing tank, washing tank, tank drain valve, suction filter with automatic shut-off valve, galvanized frame, rudder steering, adjustable track, hydro-pneumatic mixer, group centrifugal fan ø500, closing transverse or forward depending on the model, oil valves, single / double / triple-drip valve, diaphragm pump (high ...
-
Manufactured by BICCHI S.r.l.based in ITALY
Watertight body in stamped stainless steel. Rear hydraulic tipping with quick ...
-
Manufactured by C.E.A. di Cornaglia s.n.cbased in ITALY
Under soil fertilizer spreader for vineyards and similar crops - adjustable working width from mm. 500 to mm. 1400 - Basic capacity 600 Lt. ...
-
Manufactured by FA.MA. Pruning System Srlbased in ITALY
The Vine running windrowers offers the possibility of picking up runners and pruning waste in only one passage conveying them into the center of the row. Available in two models, Rx150 with one windrower head or RX300 with two windrower heads, with hydraulic or electric control it allows to manage at best the sarments and pruning waste gathered in the vineyard, making the operations of picking up ...
-
Manufactured by Binger Seilzug GmbH & Co. KGbased in GERMANY
The two-sided EB 490 Leaf Remover with hydraulic width adjustment as standard can operate in rows from 1.20 m to 2.40 m wide. The optional hydraulic height adjustment provides separate control of the height of each stripping head. This enables its use in terraced ...
-
Manufactured by Perrein SASbased in FRANCE
Simplicity : Easy to use : no hydraulics and adjustment (spanner 24 and 13). Probe position in height (bud protection) and length (plane protection). Spring tension by pawl and lever. Working depth control by means of gauge wheels, adjustable in height by crank handle and in width by sliding. Width between rows by screw on parallelogram. Quickly mounted on a high-rise or a ...
-
Manufactured by Perrein SASbased in FRANCE
The 3-points frame are hydraulically adjustable in width in order to be able to work with them narrow tractors. They are adjustable according to the height and width of the vine, adaptable to any type of intercep device with the possibility of connecting different implements. ...
-
Manufactured by Agrimollbased in ITALY
Ø: 3.00, 4.00. Material: Stainless steel. Code: 000 99 010, 000 99 ...
-
Manufactured by BFM SNCbased in ITALY
The VINEYARD TRIMMER CM-S is suitable to meet every need of green pruning in plantations. The pantograph system synchronized to 4 movements allows use both in small spaces and in very large spaces (550 mm min. to 1.550 mm max at the centre of the machine), while having reduced dimensions when it is closed. Equipped with a distribution system with independent levers which also serve to adjust the ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you