Leaf Remover Equipment In Europe
-
Manufactured by Andreas und Willi Stockmayer Maschinenbau GmbH & Co.KGbased in GERMANY
Main functional element in our Stockmayer Leaf Remover is the perforated hollow cylinder. It is connected to a radial blower that creates an air stream suction which attracts leaves to this hollow cylinder. It is driven by a hydraulic motor. A counter rotating cylinder is rubber coated to better grip leaves. Both cylinders are set apart by a ...
-
Manufactured by Olmi Srlbased in ITALY
The air produced by a compressor reaches the rotors, hits the leaves in the surrounding grape’s area in the whole deepness. A selective defoliation in the fruiting zone is obtained. ...
-
Manufactured by VBC srlbased in ITALY
Reversibility hydraulic regulation. Hydraulic height adjustment with 1 piston. Hydraulic side adjustment with 1 piston. Hydraulic swinging adjustment with 1 piston. Cutting height 500mm. Powered by 2 hydraulics engines (it requires 150 bar pressure and 20 litres/min of oil). Pipes equipped. Working height from 600mm to 1100mm. Iron main frame. Machine weight 220 kg. Electronic ...
-
Manufactured by Olmi Srlbased in ITALY
Front pneumatic deleafer with 1 front blowing head, compressor unit in the back on the 3 point hitching of the tractor, 3 hydraulic movements with electro-hydraulic joystick, drive ...
-
Manufactured by Olmi Srlbased in ITALY
Hind pneumatic deleafer with 1 reversible blowing head from left to right (180°), 4 hydraulic movements with electro-hydraulic joystick, frame tilting of 30°, cardan, 3 point hitching in the back of the ...
-
Manufactured by Olmi Srlbased in ITALY
Rear pneumatic deleafer with 1 blowing head, on the hind of the tractor on the 3-point hitching, 3 hydraulic movements with electrohydraulic joystick, frame tilting of 30°, ...
-
Manufactured by Binger Seilzug GmbH & Co. KGbased in GERMANY
The two-sided EB 490 Leaf Remover with hydraulic width adjustment as standard can operate in rows from 1.20 m to 2.40 m wide. The optional hydraulic height adjustment provides separate control of the height of each stripping head. This enables its use in terraced ...
-
Manufactured by Bertoni S.r.lbased in ITALY
Improves the quality of the grapes and reduces the number of passages with the tractor. The TRM-VORTEX Multifunction tool was created to be able to carry out various processes in the vineyard, by applying various equipment to a single towed frame: Pneumatic defoliation on 2 complete rows with the innovative Vortex system of Olmi. Sanitizing and healing treatment on the grape band. Complete ...
-
Manufactured by Binger Seilzug GmbH & Co. KGbased in GERMANY
With the overrow Leaf remover, a complete row of vines can be stripped in a single operation. It is no longer necessary to drive along vine rows without ground cover under unfavourable weather conditions. The unit can be adapted to different thicknesses of foliage just by using the hydraulic ...
-
Manufactured by Olmi Srlbased in ITALY
Improves the quality of the grapes and reduces the number of passages with the tractor. The TRM-VORTEX Multifunction tool was born from the union of known technologies of Olmi and Bertoni to be able to carry out various processes in the vineyard, applying various equipment on a single trailed ...
-
Manufactured by Binger Seilzug GmbH & Co. KGbased in GERMANY
Optionally, the single-sided EB 490 Leaf Remover can be supplied with a 180° pivoted mounting and manual or hydraulic transverse shift. When the pivoted mounting is used in row widths of more than two metres, we recommend that the 30 cm extension fork is ...
-
Manufactured by Kirkland UKbased in UNITED KINGDOM
The Olmi orchard & vineyard de-leafers ensure optimal development and can save up to 30% of time compared to manual harvesting. The air that’s produced hits the leaves ensuring a gentle but effective leaf removing system and eliminates moisture so a greater cleanliness of the crop can be reached, also fungicides and other impurities in the ...
-
Manufactured by Tecnovict - Spezia srlbased in ITALY
The 111 VRT leaf-stripper has been devised to enable controlled working in the vineyard, not removing leaves in a uniform way, as with all the previous equipment, but controlled depending on the higher or lower presence of vegetation in different parts of the same vineyard. The process we are putting forward uses a telemeasuring system to ...
-
Manufactured by Deman NVbased in BELGIUM
If you only harvest sprouts for the fresh market, you don't need a large container and a carried machine offers a solution. An extractor fan and rubber rolls to remove the leafs can be ...
-
Manufactured by UNI-MASZ H.M. Juszczuk Sp.j.based in POLAND
and leafs are removed from the product. Rollers are supported on plastic bearings and powered one-sided by the special motoreductor. Set of nozzles sprinklering product is mounted under the rollers as well as a set of movable knifes which is moving forward-backward. Removed stalks and leafs are falling down with the water to ...
-
Manufactured by Billy Goat Industries, Inc.based in USA
An ideal combination of power and size, at 2,000 cfm of commercial suction, these units are perfect for small to mid-size jobs and crews. Light weight and low overall cost, this unit will get you into the game of production leaf or debris removal. A dual shredding 14.25” diameter armor plate impeller with Piranha™ blade that ...
-
Manufactured by P. Barigelli & C. Srlbased in ITALY
Leafer unit B/6 C 45-50 is an equipment carried in the front of the tractor and is designed and constructed for agricultural use and more specifically to remove the leaf from the sugar beet. The machine is composed of a rotor that cuts the leaves and then they are moved sideways, the leaves are removed from the machines by spreading ...
-
Manufactured by SC Eurobox Logistics SRLbased in ROMANIA
Returnable crates and containers that are used for logistic purposes require frequent labelling. The printed self-adhesive labels, applied directly on these packaging, can leave traces after each removal. Because of these residual build-up, wrong barcode scanning of old codes can generate conflicts and errors during data processing. ...
-
Manufactured by HM Trailersbased in UNITED KINGDOM
Chassis - HM chassis are made from 55 grade (structural) rectangular hollow section. This gives greater strength and does not allow a build up of material on ledges. Running Gear - HU 4/5/6 are single axle, ag spec, unless high speed is requested. HU 8/10 are twin axles with ...
-
Manufactured by Agriservice di Facchi Robertobased in ITALY
Fan Diameter 50 cm. Vertical Run 50 cm. Working Side Both. MIN Pump Capacity 20 It/min. MAX Pump Capacity 40 It/min. CE Certification ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you