Forestry Equipment In Switzerland
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Soil moisture sensors that measure the moisture tension in the soil are read out with the soil moisture meter Watermark. The measuring principle is similar to that of the gypsum block system. The special sensors however do not dissolve in the soil and have a more consistent distribution of pores so that more accurate measurements are ...
-
Manufactured by Wingtra AGbased in SWITZERLAND
The RedEdge-MX is a professional, rugged multispectral sensor for advanced aerial mapping applications like agriculture, forestry or environmental research. The industry standard multispectral sensor: The RedEdge-MX full-spectrum camera lets you capture distortion-free RGB, NDVI, and advanced vegetation index layers in a single flight. Together with high-precision PPK module, RedEdge-MX ...
-
by Natkon.chbased in SWITZERLAND
The ZN12-O-WP is a point dendrometer with a ring-shaped frame offered in different sizes to optimally fit small stems, roots and branches 1-7 cm in diameter. Available diameter frames: 100 mm (ZN12-O100), 80 mm (ZN12-O80), 60 mm ...
-
Manufactured by Andermatt Biocontrol AGbased in SWITZERLAND
A wettable powder concentrate of a beneficial aerial Trichoderma atroviride strain for protection of pruning wounds and diseases like Botrytis. T-77 can be sprayed and is effective against Botrytis on leaves, flowers and fruits. In the same way pruning wounds on grapevines and other fruit trees are protected against the entrance of ...
-
Manufactured by SwissDeCodebased in SWITZERLAND
The cocoa supply chain is under constant threat of a destructive virus that infects cocoa plants. With no known cure to the disease, cocoa organizations can now prevent the destruction of millions of plants by detecting the presence of the virus ...
-
by Natkon.chbased in SWITZERLAND
The ZN12-T-WP is made out of one piece of carbon fibre (CFK) and is consequently combined with stainless steel elements (rods and nuts). The electronic displacement-sensor (linear motion potentiometer) is a weather-proof but not sealed sensor which is powered with a stable 3-5 VDC power supply. The ZN12-T-WP is our most sold dendrometer and is applicable for tree stems > 7 cm in diameter in ...
-
Manufactured by Herzog Forsttechnik AGbased in SWITZERLAND
With our specialised and modular system we transform your harvester in a multifunctional machine. Available for PONSSE Ergo and PONSSE Bear – other models on ...
-
Manufactured by Herzog Forsttechnik AGbased in SWITZERLAND
The toweryarder GRIZZLY 1000, an in-house construction of Herzog Forsttechnik Plc., is the answer to the economical difficult situation of impassible locations. The maximal rage of 1000m makes it possible to reduce the investments for forest roads to a minimum. This doesn't only save money but is also an advantage for nature and ecology of the ...
-
Manufactured by Herzog Forsttechnik AGbased in SWITZERLAND
Our traction winches are available as an option on your forestry machinery and also as external traction winch. Please choose a type for more ...
-
by Syngentabased in SWITZERLAND
AMISTAR is a broad-spectrum fungicide ideally suited for use in IPM programs. An innovation in plant disease control originally inspired by a species of forest-dwelling mushroom, which produced its own natural fungicide, AMISTAR and its related brands is now the world’s No1 fungicide. Through its broad-spectrum activity it delivers consistent yield and quality benefits around the world in a ...
-
Manufactured by Schmid Energy Solutionsbased in SWITZERLAND
The UTSD is suitable for use in a large single-family house or a block of flats as well as for a community heating ...
-
by Natkon.chbased in SWITZERLAND
The ZN12-T-2IP consists of two sealed potentiometer (IP54) to be run under very wet conditions. The frame is made out of one piece of carbon fibre (CFK) and is consequently combined with stainless steel elements (rods and nuts). Cables are connected to the potentiometers via waterproof plugs. Applicable for tree stems > 7 cm in ...
-
Manufactured by Herzog Forsttechnik AGbased in SWITZERLAND
We offer a complete solution for combined long and short wood logging for Ponsse Buffalo. With its modular conception you can compose your customised ...
-
by Natkon.chbased in SWITZERLAND
The ZN12-T-2WP is a T-shaped dendrometer with two sensors to be mounted on tree stems >7 cm in diameter. The two sensors allow measuring stem radius changes over bark and on xylem in parallel. The frame is made out of one piece of carbon fibre (CFK) and is consequently combined with stainless steel elements (rods and nuts). The two electronic displacement-sensors (linear motion ...
-
by Natkon.chbased in SWITZERLAND
The ZN12-T-IP is a point dendrometer with a sealed potentiometer (IP54) to be run under very wet conditions. The frame is made out of one piece of carbon fibre (CFK) and is consequently combined with stainless steel elements (rods and nuts). The cable is connected to the potentiometer via a waterproof plug. Applicable for tree stems > 7 cm in diameter. The frame offers to hold a second ...
-
Manufactured by Plaisance Equipementsbased in FRANCE
Medium-power self-propelled mulcher, suitable for forest maintenance work and mulching of small ...
-
Manufactured by HSM Hohenloher Spezial-Maschinenbau GmbH & Co. KGbased in GERMANY
HSM combination forwarders are available in various performance categories and versions. Our combination machines are distinguished by the wide scope of applications.The HSM 805F Kombi short is the most compact in this design series and features a powerful 4-cylinder engine, innovative drive concept and intelligent stanchion structure. The comparatively lightweight machine with its 6 wheel ...
-
Manufactured by Vitli Krpan, , D.O.O.based in SLOVENIA
Splitting Force 16 t. Necessary Tractor Capacity 30 kW / 41 HP. Tandem cast iron pump - hydraulics group 3. Valve with two automatic splitting speed levels. Control lever for manual switch (ON-OFF) of splitting. Control lever for automatic cycle. Conveyor swinging mechanism for left-right movement, Splitting wedge 4-way. 5 m telescopic conveyor. Oil cooler. Large oil tank with 100 l capacity. ...
-
Manufactured by Rottne Industri ABbased in SWEDEN
Rottne H11D in 6 and 8-wheel designs, is an articulated-steered harvester for thinning and final felling. Powerful engine, hydrostatic transmission and articulated frame joint in the centre give Rottne H11D excellent off-road performance and precise ...
-
Manufactured by Wikar Oy Abbased in FINLAND
Models 100 H, 120 H, 100 4WD, and 120 4WD are dual-beamed. This has made it possible to keep the trailer frame structure low and the trailer's centre of gravity low also when carrying a load. The sturdy structure of the trailers is able to accommodate even the heavier loader ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you